Toontrack - Superior Drummer 3 3.0.1 STANDALONE, VSTi X64 SDX Core Basic Sound Library [09

After selecting the From point, the route will start along the x-axis to achieve the start or end point and it will stop the pipe along one of the other x-axis. Notice that it can perform multiple paths along the x-axis between the two points selected.

Select a second point, for example in the nozzle that was selected previously. After this, it will be automatically displayed into the To window with its coordinates as well as the different axis in which the pipe line will reach its destination.

A new dialog box will be displayed if the options for changing the deflection along a pipe is required. You can choose to change the path using the path deflection controls or you can set the size of the pipe pipe using deflection scale components.

Each time that a pipe line is gradient deflection, a little percentage of the pipe will be included in the specific route path. This is why you can see different pipe diameters. In case you want to set in advance the diameter of each section of the pipes, you can adjust the attachment component.

The pipe diameter is also influenced by the pipe pressure and the pipe shrinkage. When you are designing the pipe, it is important to take into consideration these variables, especially if you are using hydrogen based pipeline.

When a pipe section does not have an opening, or an opening has a little of at least one of the means to control pressure such as a tee, for example, you can dispense or accumulate pressure in the pipe section or vice versa. In this case the pipe will be divided. In order to facilitate the selection of the pipe that will be divided into two sections, the pipe will have a special component called pipe intersection. d2c66b5586